Hyper-V NAT network

Set up a NAT network

1. Create new internal switch

   New-VMSwitch -SwitchName "NAT Switch" -SwitchType Internal
   

2. Get the ifIndex of the new switch ``` PS C:> Get-NetAdapter

Name InterfaceDescription ifIndex Status MacAddress LinkSpeed —- ——————– ——- —— ———- ——— vEthernet (intSwitch) Hyper-V Virtual Ethernet Adapter 24 Up 00-15-5D-00-6A-01 10 Gbps Wi-Fi Marvell AVASTAR Wireless-AC Net… 18 Up 98-5F-D3-34-0C-D3 300 Mbps Bluetooth Network … Bluetooth Device (Personal Area… 21 Disconnected 98-5F-D3-34-0C-D4 3 Mbps

3. Set the IP range of the switch

New-NetIPAddress -IPAddress 192.168.42.1 -PrefixLength 24 -InterfaceIndex

4. Configure NAT networking

New-NetNat -Name NATNet -InternalIPInterfaceAddressPrefix 192.168.42.0/24 ```